Sony DSR-2000, DSR-2000P manual 120

Extended Menu

Menu Setup 6 Chapter

Menu items in the 700s, relating to video control

Item number

Item name

Settings

701

SELECTION OF

An E-E video signal is output delayed with respect to the video input signal by the time for

VIDEO/SYNC

video circuit processing. With this item, select whether or not to delay the sync signal

DELAY

attached to the output video signal by an amount corresponding to the video signal delay.

: Delay the sync signal by the corresponding amount before attaching it.

SYNC

VIDEO: Attach a sync signal with the same timing as the input signal.

705

EDGE

Select whether to enable the edge subcarrier reducer (ESR).

SUBCARRIER

ON : Enable.

REDUCER MODE

OFF

: Do not enable.

When

playing back a composite signal, set this to ON.

708

CHROMA PHASE

Select the phase rotation mode for chroma phase control.

ROTATION MODE

The effect of this setting applies to the output levels of all of the composite video, S

video, SDI and component video signals.

U/V

: Select this setting when observing the unit's composite video output level using a

composite vectorscope.

PB/PR: Select this setting when observing the unit's component video output level using

a component vectorscope.

710

INTERNAL VIDEO

Select the test signal to be output from the internal test signal generator. When SG is

SIGNAL

selected using the VIDEO IN button, the internal test signal generator operates to output

GENERATOR

the selected test signal. This signal can also be recorded.

CB100

(for DSR-2000P):100% color bar signal

(for DSR-2000):75% color bar signal

CB75

BB: Black burst signal

713

VIDEO SETUP

Select whether to remove the setup (7.5%) from the input analog video signals and

REFERENCE

whether to add the setup (7.5%) to the output analog video signals.

(DSR-2000 only)

Sub-item

1

INPUT LEVEL

Whether to remove the setup from the input.

: Do not remove.

0.0%

7.5%: Remove.

2

OUT PUT LEVEL

Whether to add the setup to the output.

0.0%

: Do not add.

7.5%: Add.

714

VIDEO ADJUST

Select the variable range of the VIDEO and CHROMA knobs when the PROCESS

RANGE

CONTROL switch on the subsidiary control panel is set to PANEL.

:–3 dB to +3 dB

–3~+3

WIDE: – ∞to +3 dB

Items 715 to 718 : Settings for controlling the video processing system according to the menu settings.

Item number

Item name

Settings

715

VIDEO GAIN

Adjust the video output level.

CONTROL

Default value: 00H to

200H

to 3FFH

716

CHROMA GAIN

Adjust the chroma output level.

CONTROL

Default value: 00H to

200H

to 3FFH

717

CHROMA PHASE

Adjust the chroma phase.

CONTROL

Default value: 00H to

80H

to FFH

718

SETUP LEVEL

Adjust the setup level (DSR-2000)/black level (DSR-2000P).

(DSR-2000)/

Default value: 00H to

200H

to 3FFH

BLACK LEVEL

(DSR-2000P)

720

SYSTEM PHASE

Adjust the subcarrier phase.

SC

Default value:

00H

to

120 Chapter 6 Setup Menu