Sony DSR-2000, DSR-2000P Connections and, Settings, Reference Video Signals for Analog Signal Editing, Connections for Cut Editing Using i.LINK Interface, Chapter7

Chapter7

Connections and

Settings

Reference Video Signals for Analog Signal Editing

In order to provide stable video and audio signals for analog editing, it is necessary to input a reference video signal synchronized with the video signal to the REF. VIDEO IN connector and set the REF. VIDEO IN 75 Ω termination switch to ON.

REF. VIDEO IN connector and 75 Ω termination switch

Connections for Cut Editing Using i.LINK Interface

(Optional DSBK-190 Required)

Using two DSR-2000/2000P units, each fitted with the optional DSBK-190 board, as a pair of player and recorder, you can configure a cut editing system.

You can use the same system also to digitally dub signals in DVCAM format through an i.LINK interface (see page 61).

It is also possible to use an i.LINK-compatible camcorder such as the DSR-500WS/500WSP as the player and carry out cut editing.

Chapter 7 Connections and Settings 125