Sony DSR-2000, DSR-2000P 3,6, 2,5, Synchronous Playback

6

1

2

3

Hold down the ENTRY/SHIFT button, and press the IN button. The recorder IN point is set.

The player IN point is set.

4 Press the RECORDER button, turning it on.

5 Cue up to the recorder tape position where to start synchronous playback.

Press the PLAYER button, turning it on.

Cue up to the player tape position where to start playback. Hold down the ENTRY/SHIFT button, and press the IN button.

Synchronous Playback

Connecting two DSR-2000/2000P units and synchronizing their tape transport, you can carry out two-unit synchronous playback with an accuracy of ±0 frame.

For equipment/signal connections and basic settings, see the section “Connections for Two-Unit Synchronous Playback” (page 132).

Use the following procedure.

(In the following, the controlling unit is referred to as the recorder (this unit) and the controlled unit as the player.)

1 4

7 3,6 2,5

(Continued)

Playback and Recording 3 Chapter

Chapter 3 Recording and Playback 59