TV Virtual Surround Settings (TVS) 
When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left,
R:right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. This only works when playing a multichannel Dolby audio sound track.
If the player is set up to output the signal from the DIGITAL OUT (OPTICAL or COAXIAL)/HDMI OUT jack, the surround effect will only be heard when “DOLBY DIGITAL” is set to
SUR
1 Press SUR during playback.
The following display appears.
TVS DYNAMIC THEATER
2 Press SUR repeatedly to select one of the TVS sounds.
See the explanations given for each item in the following section.
•TVS DYNAMIC THEATER
•TVS DYNAMIC
•TVS WIDE
•TVS NIGHT
•TVS STANDARD
To cancel the setting
Select “OFF” in step 2.
◆TVS DYNAMIC THEATER
Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below).
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
Sub woofer
◆TVS DYNAMIC
Creates one set of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below).
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
◆TVS WIDE
Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below).
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
42