Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be connected.
Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 64).
The default settings are underlined.
SCREEN SETUP
TV TYPE: | 16:9 |
HDMI RESOLUTION: | AUTO |
YCBCR/RGB (HDMI): | YCBCR |
SCREEN SAVER: | ON |
BACKGROUND: | JACKET PICTURE |
LINE: | VIDEO |
4:3 OUTPUT: | FULL |
◆TV TYPE
Selects the aspect ratio of the connected TV (4:3 standard or wide).
16:9 | Select this when you connect a | |||
| ||||
| wide mode function. | |||
|
|
|
|
|
4:3 | Select this when you connect a | |||
LETTER | 4:3 screen TV. Displays a wide | |||
BOX | picture with bands on the upper | |||
| and lower portions of the | |||
| screen. | |||
|
|
|
|
|
4:3 | Select this when you connect a | |||
PAN SCAN | 4:3 screen TV. Automatically | |||
| displays the wide picture on the | |||
| entire screen and cuts off the | |||
| portions that do not fit. | |||
|
|
|
|
|
16:9 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4:3 LETTER BOX
4:3 PAN SCAN
Note
Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.
◆HDMI RESOLUTION
Selects the type of video signals output from the HDMI OUT jack. When you select AUTO (default), the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/projector, etc.
AUTO |
| Normally, select this. |
|
|
|
1920⋅ | 1080i | Sends 1920⋅ 1080i video |
|
| signals. |
|
|
|
1280⋅ | 720p | Sends 1280⋅ 720p video |
|
| signals. |
|
| |
720⋅ 480/576p | Sends 720⋅ 480p or | |
|
| 720⋅ 576p video signals. |
|
|
|
Notes
•Even when a setting other than “AUTO” is selected and the connected TV cannot accept the resolution, the player automatically adjusts the video signals that are suitable for the TV.
•When the HDMI indicator on the front panel lights up, images from the S VIDEO OUT and
LINE OUT (VIDEO) jacks are enlarged vertically. (Except when 720 ⋅ 480/576p is
selected)
◆YCBCR/RGB (HDMI)
Selects the type of HDMI signal output from HDMI OUT jack.
YCBCR | Outputs YCBCR signals. |
|
|
RGB | Outputs RGB signals. |
|
|
Notes
•If the playback picture becomes distorted, set “YCBCR” to “RGB.”
•If the HDMI OUT jack is connected to equipment with a DVI jack, “RGB” signals will be automatically output even when you select “YCBCR”.
66