◆TVS NIGHT
Large sounds, such as explosions, are suppressed, but quieter sounds are unaffected. This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of “TVS WIDE” at low volume.
◆TVS STANDARD
Creates three sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). Use this setting when you want to use TVS with 2 separate speakers.
LR
L:Front speaker (left)
R:Front speaker (right) 
: Virtual speaker
Notes
•When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver).
•Not all discs will respond to the “TVS NIGHT” function in the same way.
•When the playing signal does not contain a signal for the rear speakers, you cannot hear the TVS effect.
•When you select one of the TVS modes, the player does not output the sound of centre speaker.
•Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings.
•If you use the DIGITAL OUT (OPTICAL or COAXIAL)/HDMI OUT jack and set “DOLBY DIGITAL” to “DOLBY DIGITAL,” “MPEG” to “MPEG,” and “DTS” to “ON,” in “AUDIO SETUP”, sound will come from your speakers but it will not have the SURROUND effect.
•The TVS effects do not work when using the Fast Play or Slow Play functions, even though you can change the TVS modes.
Adjustments Sound
43