Sony DVP-NS76H Settings for the Sound

◆DivX

Displays the registration code for this player. For more information, go to

http://www.divx.com

on the Internet.

◆AUDIO (HDMI)

Selects the type of audio signal output from the HDMI OUT jack.

AUTO	Normally, select this. Outputs
	audio signals according to the
	“DIGITAL OUT” settings
	(page 70).
PCM	Converts Dolby Digital, or 96
	kHz/24 bit PCM signals to 48
	kHz/16 bit PCM.

Note

A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and “AUTO” is selected. In this case, select “PCM.”

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 64).

The default settings are underlined.

AUDIO SETUP

AUDIO ATT:		OFF
AUDIO DRC:		STANDARD
AUDIO FILTER:		SHARP
DOWNMIX:	DOLBY SURROUND
DIGITAL OUT:		ON
DOLBY DIGITAL:		D-PCM
MPEG:		PCM
DTS:		OFF
48kHz/96kHz PCM:		48kHz/16bit

◆AUDIO ATT (attenuation)

If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.

This function affects the output of the following jacks:

–LINE OUT L/R (AUDIO) jacks

–LINE (RGB)-TV jack

OFF Normally, select this position.

ON Select this when the playback sound from the speakers is distorted.

◆AUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-VR mode only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.”

This function affects the output from the following jacks:

– LINE OUT L/R (AUDIO) jacks

– LINE (RGB)-TV jack

– DIGITAL OUT (OPTICAL or COAXIAL)/ HDMI OUT jack only when “DOLBY DIGITAL” is set to “D-PCM” (page 70).

STANDARD Normally select this position.

TV MODE	Makes low sounds clear even if
	you turn the volume down.
WIDE	Gives you the feeling of being
RANGE	at a live performance.

Adjustments and Settings

,continued 69