There is no sound.
,
,The connecting cord is damaged.
,The player is connected to the wrong input jack on the amplifier (receiver) (page 20).
,The amplifier (receiver) input is not correctly set.
,The player is in pause mode or in Slow- motion Play mode.
,The player is in fast forward or fast reverse mode.
,If the audio signal does not come through the DIGITAL OUT (OPTICAL or COAXIAL)/HDMI OUT jack, check the audio settings (page 70).
,While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”
,When playing multichannel MPEG audio soundtracks, only the Front (L) and Front
(R) signal will be output from your two front speakers.
,The equipment connected to the HDMI OUT jack does not conform to the audio signal format, in this case set “AUDIO(HDMI)” in “AUDIO SETUP” to “PCM” (page 69).
No sound is output from the HDMI OUT jack
,Try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the HDMI cord again.
,The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals).
Sound distortion occurs.
,Set “AUDIO ATT” in “AUDIO SETUP” to “ON” (page 69).
The sound volume is low.
,The sound volume is low on some DVDs. The sound volume may improve if you set “AUDIO DRC” in “AUDIO SETUP” to “TV MODE” (page 69).
,Set “AUDIO ATT” in “AUDIO SETUP” to “OFF” (page 69).
The remote does not function.
,The batteries in the remote are weak.
,There are obstacles between the remote and the player.
,The distance between the remote and the player is too far.
,The remote is not pointed at the remote sensor on the player.
The disc does not play.
,The disc is turned over.
Insert the disc with the playback side facing down.
,The disc is skewed.
,The player cannot play certain discs (page 7).
,The region code on the DVD does not match the player.
,Moisture has condensed inside the player (page 3).
,The player cannot play a recorded disc that is not correctly finalized (page 7).
The MP3 audio track cannot be played (page 52).
,The DATA CD is not recorded in an MP3 format that conforms to ISO 9660 Level 1/ Level 2 or Joliet.
,The DATA DVD is not recorded in MP3 format that conform to UDF (Universal Disk Format).
,The MP3 audio track does not have the extension “.MP3.”
,The data is not formatted in MP3 even though it has the extension “.MP3.”
,The data is not
,The player cannot play audio tracks in mp3PRO format.
,“MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” (page 55).
,The DATA CD/DATA DVD contains a DivX video file.
The JPEG image file cannot be played (page 52).
,The DATA CD is not recorded in a JPEG format that conforms to ISO 9660 Level 1/ Level 2, or Joliet.
,The DATA DVD is not recorded in JPEG format that conforms to UDF (Universal Disk Format).
Information Additional
,continued 73