3 Press X/x to select one of the surround modes.

Refer to the following explanations given for each item.

For 2 speaker setups

•TVS DYNAMIC

•TVS WIDE

•TVS NIGHT

•TVS STANDARD

For 4 to 6 speaker setups

(If you select “NONE” in the setting of “REAR” in “SPEAKER SETUP”(page 94), you cannot select these modes.)

•NORMAL SURROUND

•ENHANCED SURROUND

•VIRTUAL REAR SHIFT

•VIRTUAL MULTI REAR

•VIRTUAL MULTI DIMENSION

4 Press ENTER.

To cancel the setting

Select “OFF” in Step 3.

To turn off the Control Menu

Press DISPLAY repeatedly until the Control Menu is turned off.

TVS DYNAMIC

Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). The sound imaging effect is distinct and clearly reproduces each aural element of the audio track.

This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

TV

TVS WIDE

 

Sound

Uses sound imaging to create virtual rear

speakers from the sound of the front speakers

(L, R) without using actual rear speakers. The

virtual speakers are reproduced as shown in

Adjustments

 

the illustration below. This gives the sound

 

an expanded effect that fills the area

 

surrounding the listener.

 

This mode is effective when the distance

 

between the front L and R speakers is short,

 

such as with built-in speakers on a stereo TV.

 

 

 

 

 

TV

 

 

 

 

 

 

For 2 speaker setups

When you connect only 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. Select one of the following modes:

If the player is set up to output the signal from the DIGITAL OUT (OPTICAL or COAXIAL) jack, the surround effect will be heard only when “DOLBY DIGITAL” and “DTS” are set to “D-PCM” and “MPEG” is set to “PCM” in “AUDIO SETUP”(page 92).

TVS NIGHT

Large sounds, such as explosions, are compressed, but the quieter sounds are unaffected. This feature is useful when you don’t want to disturb other people but still want to hear the dialog and enjoy the surround sound effects of “TVS WIDE.”

continued

63