By pressing

You can

RMT-D140A only

 

CH +/–, number

Select the channel of the TV

buttons, ENTER

 

 

 

*If you use number buttons to select the TV’s programme position, press -/-- followed by the number buttons for two-digit numbers.

Controlling the volume of your AV amplifier (receiver) with the remote

 

[/1

TV/DVD

LCD screen

switch

 

 

Scroll key

VOL +/–

1 Slide the TV/DVD switch to DVD.

2 While holding down [/1, press down on the scroll key.

“AV P-90” appears in the LCD screen.

3 Release [/1.

4 Toggle the scroll key up or down to select your AV amplifier (receiver’s) manufacturer’s code (see the table below).

5 Press down on the scroll key.

The manufacturer’s code flashes and the remote is set.

Code numbers of controllable AV

amplifiers (receivers)

If more than one code number is listed, try entering them one at a time until you find the one that works with your AV amplifier (receiver).

If you do not connect an AV amplifier (receiver), you can control your TV’s volume by setting the code number to 90 (default). However, you must first set the code number of controllable TVs as explained above.

Manufacturer

Code number

Sony

80, 88, 89, 91

 

 

Denon

84, 85, 86

 

 

Kenwood

92, 93

 

 

Onkyo

81, 82, 83

 

 

Pioneer

99

 

 

Sansui

87

 

 

Technics

97, 98

 

 

Yamaha

94, 95, 96

 

 

Controlling the AV amplifiers

(receivers)

When you set the TV/DVD switch to DVD, you can control the volume of the AV amplifier (receiver) using VOL +/–.

82