xCD DIRECT
Eliminates the use of unnecessary circuits when playing CDs. This setting will be activated when you open or close the disc tray.
This function affects the output of the following jacks:
—AUDIO OUT L/R 1/2 jacks
—5.1CH OUTPUT jacks
—PHONES jack
OFF | Select this when playing CD discs, |
| including CD type DTS discs. |
|
|
ON | Eliminates the use of unnecessary |
| circuits needed to play CDs. |
|
|
Note
If you select “ON” when playing CD type DTS discs, the sound will become noisy.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.
Select “AUDIO SETUP” in the Setup Display. For details on using the display, see “Using the Setup Display” (page 83).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT: |
| OFF |
AUDIO DRC: |
| STANDARD |
AUDIO FILTER: |
| SHARP |
DOWNMIX: | DOLBY SURROUND | |
DIGITAL OUT: |
| ON |
DOLBY DIGITAL: |
| |
MPEG: |
| PCM |
DTS: |
| |
48kHz/96kHz PCM: | 48kHz/16bit | |
xAUDIO ATT (attenuation)
If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.
This function affects the output of the following jacks:
—AUDIO OUT L/R 1/2 jacks
—5.1CH OUTPUT jacks
—PHONES jack
OFF Turns off the audio attenuation. Normally, select this position.
ON Reduces the audio output level so that no sound distortion occurs.
Select this when the playback sound from the speakers is distorted.
xAUDIO DRC (Dynamic Range Control) (DVD
Makes the sound clear when the volume is turned down when playing a DVD that has the “AUDIO DRC” function. This affects the output from the following jacks:
—AUDIO OUT L/R 1/2 jacks
—5.1CH OUTPUT jacks
—PHONES jack
continued
Adjustments and Settings
91