xTEST TONE

The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust the “BALANCE” and “LEVEL.”

OFF

The test tone is not emitted from

 

the speakers.

 

 

ON

The test tone is emitted from each

 

speaker in sequence while

 

adjusting balance or level.

 

When you select one of the

 

“SPEAKER SETUP” items, the

 

test tone is emitted from both left

 

and right speakers simultaneously.

 

 

Adjusting the speaker volume and level

1 Select “SPEAKER SETUP” in the Setup Display.

2 Select “TEST TONE” and set to “ON.”

You will hear the test tone from each speaker in sequence.

3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using C/c and “LEVEL” using X/x.

The test tone is emitted from both left and right speakers simultaneously.

4 Select “TEST TONE” and set to “OFF” to turn off the test tone.

Notes

•When you adjust the speaker settings, the sound cuts off for a moment.

•The test tone signals are not output from the digital jack.

Adjustments and Settings

97