,SACD audio signals are not output from the digital jack.

,While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/ L,” or “2:2/R.”

Sound is noisy.

,The disc is dirty or flawed.

Operation

The remote does not function.

,There are obstacles between the remote and the player.

,The distance between the remote and the player is too far.

,The remote is not pointed at the remote sensor on the player.

,The batteries in the remote are weak.

Sound distortion occurs.

,Set “AUDIO ATT” in “AUDIO SETUP” to “ON” (page 91).

The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track.

,Check the speaker connections and setting (page 25, 31, 92)

,Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital, DTS, or MPEG audio format.

The sound comes from the centre

speaker only.

,Depending on the disc, the sound may come from the centre speaker only.

,Set “SURROUND” to “OFF” in the Control Menu display (page 62).

The disc does not play.

,There is no disc inside.

,The disc is turned over.

Insert the disc with the playback side facing down on the disc tray.

,The disc is skewed.

,The player cannot play CD-ROMs, etc. (page 6).

,The region code on the DVD does not match the player.

,Moisture has condensed inside the player. Remove the disc and leave the player turned on for about half an hour. Turn on the power

again before playing the disc (page 3).

 

, The player cannot play DVD-Rs, DVD-RWs,

 

CD-Rs, or CD-RWs that are not finalized.

Additional

 

 

The disc does not start playing from

 

the beginning.

 

, Programme Play, Shuffle Play, Repeat Play, or

Information

A-B Repeat Play has been selected (page 43).

 

Press CLEAR to cancel these functions before

 

playing a disc.

 

, Resume Play has been selected.

 

During stop, press x on the player or the

 

remote and then start playback (page 39).

 

, Depending upon the disc, the menu may

 

automatically appear on the TV screen.

 

 

 

 

The player starts playing the disc

 

automatically.

 

,The disc features an auto playback function.

,“AUTO PLAY” in “CUSTOM SETUP” is set to “TIMER” (page 89).

continued

99