Sony DVP-NS999ES manual B-2, B-1

BConnecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck

If the stereo amplifier (receiver) has audio input jacks L and R only, use B-1 . If the amplifier (receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use B-2 . In this case, you can also connect the player directly to the MD deck or DAT deck without using your stereo amplifier (receiver).

CD/DVD player

DIGITAL OUT		AUDIO OUT		5.1CH OUTPUT
PCM/ DTS/		1	2	FRONT	REAR	CENTER
			L
MPEG/ DOLBY DIGITAL					L
COAXIAL	OPTICAL
						COMMAND MODE
						1 2 3
					R
			R			WOOFER
2	2	Y	PB/CB	PR/CR	SELECTABLE
					INTERLACE
					PROGRESSIVE
1	1
VIDEO	S1 VIDEO			SCAN SELECT
OUT	OUT		COMPONENT VIDEO OUT

B-2	Coaxial digital				B-1
DIGITAL OUT	cord (not supplied) Stereo audio cord			AUDIO OUT
PCM/ DTS/		(not supplied)	(white)	1	L
					2
MPEG/ DOLBY DIGITAL
COAXIAL	OPTICAL
	or	or	(red)		R
to DIGITAL OUT
(COAXIAL or OPTICAL)			to AUDIO OUT L/R 1 or 2
	Optical digital cord
	(not supplied)
	Remove jack cap	(white)	(red)
	before connecting
to coaxial or optical digital			to audio input
input

[Speakers]

Stereo amplifier (receiver)

Front (L)

MD deck/DAT deck

Front (R)

l: Signal flow

z Hints	Note
• In connection B-1 , you can use the supplied
	Super Audio CD audio signals are not output from
audio/video cord instead of using a separate
stereo audio cord.	the digital jack.

•To realize better surround sound effects, make sure that your listening position is in between your speakers.

26