determines the progressive conversion method.
When “COMPONENT OUT” in “SCREEN SETUP” is set to “PROGRESSIVE,” the player automatically detects whether the software is video based or film based, and converts the video signals in the corresponding progressive conversion method. When the set point is closer to “VIDEO,” the video based software conversion is more likely to be selected; when closer to “FILM,” the film based conversion is the likely choice. When set specifically to “VIDEO,” the video based software conversion will be always applied regardless of the software type.
See “Glossary” for details about the video based software and film based software (page 86).
•PROGRESSIVE 2:
Adjusts the progressive video signals processed under the video based software conversion. Set closer to “STILL” for software containing static pictures such as scenery. Or, set closer to “MOVE” for software containing dynamic moving pictures such as a car chase.
•PICTURE:
Changes the contrast.
•BRIGHTNESS:
Changes the overall brightness.
•COLOR:
Makes the colours deeper or lighter.
•HUE:
Changes the colour balance.
•GAMMA:
Adjusts the brightness of selected areas. See “Adjusting the brightness of selected areas (Gamma Correction)” (page 63) for details.
1 Press VIDEO CONTROL repeatedly to select “MEMORY,” then press
ENTER1 2.( 2 7 )PLAY 
The “DVE”1 8 ( 3 4 )adjustment bar appearsDVD .
C 0 1 : 3 2 : 5 5
DVE OFF 1 2 3 SOFT
2 PressS lect :C/c toENTERadjustCancelthe: RETURNoutline, then press ENTER.
The adjustment is saved, and the “BNR” adjustment bar appears.
3 Repeat step 2 to adjust “BNR” and the other items such as “Y NR” and “C NR.”
4 When you reach the “GAMMA” adjustment bar, press x.
Video Control display 1 appears. To go to Video Control display 2, press x again. You can check all the adjustments other than “GAMMA.”
Video Control display 1
DVE | OFF | 1 | 2 | 3 | SOFT | |||
BNR | OFF | 1 | 2 | 3 | OFF | |||
Y NR |
|
|
|
|
|
| ||
C NR |
|
|
|
|
|
| OFF | |
CHROMA DELAY | 0 | 1 2 |
|
|
| |||
AV ALIGNMENT |
|
|
|
|
|
| 120ms | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select : ENTER Cancel : RETURN
Video Control display 2
PROGRESSIVE1 FILM |
|
|
| VIDEO- 4 | ||
PROGRESSIVE2 STILL |
|
|
| MOVE 0 | ||
PICTURE |
|
|
|
|
| 0 |
|
|
|
|
| ||
BRIGHTNESS |
|
|
|
|
| 0 |
|
|
| ||||
|
|
| ||||
COLOR |
|
|
| 0 | ||
|
|
| ||||
HUE |
|
|
| 0 | ||
| ||||||
RESET
Select : 
ENTER Cancel : RETURN
To turn off the display
Press ORETURN.
zHints
•To reset the picture items to the default values, press c after step 4 to select “RESET” in Video Control display 2 and press ENTER.
•You can skip the adjustment without saving by pressing X/x in step 2.
•Video based software, such as TV drama, animation, and live music software are more adequately processed under the video based conversion. Film based software such as movies are better processed under the film based conversion.
Notes
•If the outlines of the images on your screen should become blurred, set “BNR” to “OFF.”
•Depending on the disc or the scene being played, the “BNR,” “Y NR,” or “C NR” effect may be hard to discern.
•Depending on the disc or the scene being played, noise found in the disc may become more apparent. If this happens, it is recommended that you use the BNR function with the DVE function. If the condition still does not improve, reduce the DVE level, or select “SOFT” (DVD only).
62