ON | Stores the resume setting in |
| memory for up to six discs. |
| (The settings remain in |
| memory even if you select |
| OFF.) |
OFF | Does not store the resume |
| setting in memory. Playback |
| restarts at the resume point |
| only for the current disc in the |
| player. |
◆BOOKMARK RESETt
Resets the bookmarks. Select this and press ENTER. The “BOOKMARK RESET” display appears. Press ENTER again to erase all of the bookmarks in all of the discs.
◆CD DIRECT
Eliminates the use of unnecessary circuits when playing CDs. This setting will be activated when you open or close the disc tray.
This function affects the output from the following jacks:
–AUDIO OUT L/R 1/2 jacks
–5.1CH OUTPUT jacks
OFF Select this when playing CD discs, including CDs with DTS tracks.
ON Eliminates the use of unnecessary circuits when playing CDs.
Note
If you select “ON” when playing CDs with DTS tracks, the sound will become noisy.
Settings for the Sound
(AUDIO SETUP)“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.
Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 73).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT: |
| OFF |
AUDIO DRC: |
| STANDARD |
AUDIO FILTER: |
| SHARP |
DOWNMIX: | DOLBY SURROUND | |
DIGITAL OUT: |
| ON |
DOLBY DIGITAL: |
| |
MPEG: |
| PCM |
DTS: |
| |
48kHz/96kHz PCM: | 48kHz/16bit | |
◆AUDIO ATT (attenuation)
If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.
This function affects the output of the following jacks:
–AUDIO OUT L/R 1/2 jacks
–5.1CH OUTPUT jacks
OFF Normally select this position.
ON Select this when the playback sound from the speakers is distorted.
◆AUDIO DRC (Dynamic Range Control) (DVD
Allows smaller sounds to be heard at low volume when playing a DVD that conforms to “AUDIO DRC.” This affects the output from the following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
– DIGITAL OUT (OPTICAL or COAXIAL) jack only when “DOLBY DIGITAL” is set to
STANDARD | Normally select this position. |
TV MODE | Makes the low sounds clear |
| even if you turn the volume |
| down. |
WIDE | Gives you the feeling of |
RANGE | being at a live performance. |
78