The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that only the “SIZE” setting does not return to the default setting.
◆SIZE
Selects the size of the speakers.
• FRONT
LARGE | Normally select this position. |
SMALL | Select this when the speaker |
| cannot reproduce adequate bass |
| frequencies. |
• CENTER |
|
|
|
LARGE | Normally select this position. |
SMALL | Select this when the speaker |
| cannot reproduce adequate bass |
| frequencies. |
|
|
NONE | Select this if you do not |
| connect a center speaker. |
• REAR |
|
|
|
LARGE | Normally select this position. |
SMALL | Select this when the speaker |
| cannot reproduce adequate bass |
| frequencies. |
|
|
NONE | Select this if you do not |
| connect rear speakers. |
|
|
• SUBWOOFER | |
YES | Select this if you connect a |
| subwoofer to output the LFE |
| (low frequency effect) signals |
| from the subwoofer. |
|
|
NONE | Select this if you do not |
| connect a subwoofer. |
Notes
•The cut off frequency for the subwoofer is fixed at 120 Hz.
•If your speakers are too small to reproduce low bass frequencies, utilize a subwoofer for low frequency sound. When you set the speaker settings to “SMALL,” the bass redirection circuitry will be activated and the bass frequencies for the speakers are output from the subwoofer.
•Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers.
◆DISTANCE
Sets the distance from your listening position to the speakers.
Set the distance to your front speakers in “FRONT” first (A). Values in “CENTER” (center speaker), “REAR” (rear speaker), and “SUBWOOFER” will automatically change to the same value (B, C and D). Then, adjust these values to reflect the actual distance to your centre speaker, rear speakers, and subwoofer.
B
D
A A
(1~15 m) | (1~15 m) |
C C
Be sure to change the value in the Setup | Settings | ||
Display each time you move the speakers. | |||
| |||
Start from the front speaker. The default |
| ||
adjustments are in parentheses. | and | ||
|
| ||
CENTER | Set this within ±2 metres of | Adjustments | |
FRONT | Set this between 1 and 15 |
| |
(3 m) | metres in 0.05 metre |
| |
| increments. |
| |
(3 m) | the “FRONT” setting in 0.05 |
| |
| metre increments. For |
| |
| example, if “FRONT” is set |
| |
| to 6 metres, “CENTER” can |
| |
| be set between 4 and 8 |
| |
| metres. |
| |
REAR (3 m) | Set this within |
| |
| metres of the “FRONT” |
| |
| setting in 0.05 metre |
| |
| increments. For example, if |
| |
| “FRONT” is set to 6 metres, |
| |
| “REAR” can be set between |
| |
| 1 and 8 metres. |
| |
SUBWOOFER | Set this within |
| |
(3 m) | metres of the “FRONT” |
| |
| setting in 0.05 metre |
| |
| increments. For example, if |
| |
| “FRONT” is set to 6 metres, |
| |
| “REAR” can be set between |
| |
| 1 and 8 metres. |
| |
|
| 81 | |
| ,continued |