•MPEG (DVD VIDEO/DVD-RW only) Selects the type of MPEG audio signal.

PCM

Select this when the player is

 

connected to an audio

 

component without a built-in

 

MPEG decoder.

 

 

MPEG

Select this when the player is

 

connected to an audio

 

component with a built-in

 

MPEG decoder.

 

 

•DTS (DVD VIDEO only) Selects the type of DTS signal.

D-PCM

Select this when the player is

 

connected to an audio

 

component without a built-in

 

DTS decoder.

DTS

Select this when the player is

 

connected to an audio

 

component with a built-in

 

DTS decoder.

•48kHz/96kHz PCM (DVD VIDEO only) Selects the sampling frequency of the audio signal.

48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48 kHz/16 bit.

96kHz/24bit All types of signals including 96 kHz/24 bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as

48 kHz/16 bit.

Notes

•Even if you set “48kHz/96kHz PCM” to “96kHz/24bit,” the sampling frequency is converted to 48kHz/16bit when a “SURROUND” mode (page 58) is selected.

•The analog audio signals from the AUDIO OUT L/R 1/2 jacks and 5.1CH OUTPUT jacks are not affected by this setting and keep their original sampling frequency level.

Settings for the Speakers(SPEAKER SETUP)

To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume of the speakers to the same level.

This setting is effective when connecting the speaker with 5.1 CH OUTPUT jacks (page 28).

You can create two different Speaker Setup settings, one for Super Audio CDs and one for all other types of discs.

When nothing is set in “SUPER AUDIO CD,” the “DVD” setting you have set becomes effective when you play Super Audio CDs.

1 Follow steps 1 through 4 of “Using the Setup Display” (page

73)to select “SPEAKERS SETUP” in the Setup Display.

SPEAKER SETUP

DVD:

SUPER AUDIO CD:

2 Select “DVD” or “SUPER AUDIO CD” using X/x, then press

ENTER.

Example: when “DVD” is selected.

SPEAKER SETUP (DVD)

SIZE:

DISTANCE:

LEVEL(FRONT):

 

LEVEL(REAR):

OFF

TEST TONE:

FRONT:LARGE

CENTER:LARGE

REAR:LARGE

SUBWOOFER:YES

To set, press , then ENTER .

To quit, press SETUPDISPLAY. .

80