zHint
You can also select “AUDIO” from the Control Menu (page 14).
Notes
•While playing a Super VCD on which the audio track is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/ R.”
•You cannot change the sound for Super Audio CDs.
Displaying the audio information of the discPress DISPLAY during playback to display the Control Menu. Select “AUDIO” using X/x. The channels being played are displayed on the screen.
For example, in Dolby Digital format, multiple signals ranging from monaural to
5.1channel signals can be recorded on a DVD VIDEO. Depending on the DVD VIDEO, the number of the recorded channels may differ.
| Current audio format* | |
|
|
|
1 2 ( 2 7 ) | PLAY | |
1 8 ( 3 4 ) | DVD VIDEO |
T1 : 3 2 : 5 5
1:ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Currently playing programme format**
*“PCM,” “MPEG,” “DTS,” or “DOLBY DIGITAL” is displayed.
In the case of “DOLBY DIGITAL,” the channels in the playing track are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
| Rear component 2 |
DOLBY DIGITAL 3 / 2 . 1 | |
Front component 2+ | LFE (Low Frequency |
Center component 1 | Effect) component 1 |
**The letters in the program format display indicate the following sound components:
L:Front (left)
R:Front (right)
C:Center
LS: Rear (left)
RS: Rear (right)
S:Rear (monaural): The rear
component of the Dolby Surround processed signal and the Dolby Digital signal
LFE: Low Frequency Effect signal
zHint
When playing the Dolby Digital or DTS sound tracks, “LFE” is enclosed in a dotted line when the LFE signal is not being output.
Adjustments Sound
57