Sony DVP-S715 Unpacking, Hooking Up the System, Overview, Inserting batteries into the remote

Getting Started

Unpacking

Check that you have the following items:

•Audio/video connecting cord (1)

•S video cable (1)

•Remote commander (remote) RMT-D102P (for DVP- S715) (1)

•Remote commander (remote) RMT-D105P (for DVP- S315)(1)

•Size AA (R6) batteries (2)

Hooking Up the System

Overview

This section describes how to hook up the CD/DVD player to a TV. You cannot connect this player to a TV without an EURO AV (SCART) connector or a video input connector. Be sure to turn off the power of each component before making the connections.

pTo connect to a TV and a VCR

Inserting batteries into the remote	CD/DVD player
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor gon the player.	To ÉEURO AV1	To : EURO
	(RGB)-TV
		AV2
		To an AC
	TV	outlet
		VCR
	To EURO AV
	(SCART) IN
		To EURO AV
		(SCART) OUT

zYou can control TVs and Sony AV amplifiers (receivers) using the supplied remote

See page 31.

Notes

: Signal flow

pTo connect to a TV and to listen to the sound through speakers connected to an amplifier (2ch – L,R)

•Do not leave the remote in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

	CD/DVD player
To
ÉEURO AV1
(RGB)-TV	To
	AUDIO	To an AC
TV	OUT
		outlet
	To EURO AV
	(SCART) IN

To audio input

	To audio
: Signal flow	input
Amplifier (Receiver)
: Signal flow

6GB