Playing Discs in Various Modes
Controlling the TV or the AV Amplifier (Receiver) with the Supplied Remote Z
If you adjust the remote signal, you can control your TVs with the supplied remote. Default setting is to control Sony TVs with the gmark.
When you connect the player to a Sony AV amplifier, you can also set the input of the amplifier to this player with the supplied remote .
|
|
| 1/u |
|
|
| |
|
|
| TV/DVD |
|
|
| |
1 | 2 | 3 | Switch | 1 | 2 | 3 | |
| |||||||
4 | 5 | 6 | Number | 4 | 5 | 6 | |
7 | 8 | 9 | 7 | 8 | 9 | ||
Buttons | |||||||
| 0 |
|
|
| 0 |
|
Manufacturer | Code |
| number |
|
|
Sony (default) | 01 |
|
|
Grundig | 11 |
|
|
Hitachi | 24 |
|
|
Loewe | 45 |
|
|
Nokia | 15,16,69 |
|
|
Panasonic | 17,49 |
|
|
Philips | 06,07,08 |
|
|
Saba | 12,13 |
|
|
Samsung | 22,23 |
|
|
Sanyo | 25 |
|
|
Sharp | 29 |
|
|
Telefunken | 36 |
|
|
Thomson | 43 |
|
|
Toshiba | 38 |
|
|
Controlling TVs with the remote
1Slide TV/DVD switch to TV.
2Hold down 1/u, and enter your TV’s manufacturer’s code in the table below using the number buttons. Then release 1/u.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Notes
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Reset the appropriate code number.
(Continued)