3 Load a scene file.
To load a scene file stored in the camcorder
Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob.
The s which is displayed on the left of the file number changes to x.
The camcorder is set up according to the loaded scene file.
F04 | SCENE FILE | TOP | |
s1 | :SCENE | 25 |
|
x2 | :SCENE | 26 |
|
s3 | :SCENE | 27 |
|
s4 | :SCENE | 28 |
|
s5 | :NO FILE |
|
|
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: | SCENE21 |
|
|
To cancel the selected scene file
Move the b mark to x, and press the MENU knob. x changes to s.
The camcorder returns to the settings before selecting this scene file.
To load a scene file saved in the “Memory Stick”
Proceed as follows:
1Turn the MENU knob to move the b mark to “SCENE RECALL,” and press the MENU knob.
The P00 SCENE RECALL page appears.
?P00 SCENE RECALL | ESC | |
DISPLAY MODE | : | F.ID |
MEM<1>:STANDARD
MEM<2>:STANDARD
MEM<3>:STANDARD
MEM<4>:STANDARD
MEM<5>:NO FILE
2Turn the MENU knob until the page which contains the desired file number appears, then press the MENU knob.
3Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob.
The message “RECALL OK? YES bNO” appears.
P01 SCENE RECALL | ESC | ||
RECALL | OK? | YES | NO |
DISPLAY | MODE | : | ALL |
001.SCENE1
002.SCENE2 003.NO FILE 004.SCENE4 005.SCENE5
***.5FILE LOAD 
4 To carry out the recall, move the b mark to “YES” and press the MENU knob.
To cancel, press the MENU knob leaving the b mark pointing to “NO.”
When the loading is completed, the message “COMPLETE” appears. The camcorder is set up according to the loaded scene file.
If no file is present with a particular file number, this is shown as “NO FILE.”
5 To end the menu operation, set the MENU ON/OFF switch to OFF.
Loading scene files from a “Memory Stick” into the camcorder memory
You can load up to five scene files stored in the “Memory Stick” into the camcorder memory in a single operation.
1 After displaying the SCENE FILE page (page 102), turn the MENU knob to move the b mark to “SCENE RECALL,” and press the MENU knob.
A SCENE RECALL page appears.
2 Turn the MENU knob until the SCENE RECALL page which contains the desired scene files appears, then press the MENU knob.
3 Turn the MENU knob to move the b mark to “5FILE
LOAD b MEM
The message “RECALL OK? YES bNO” appears.
P01 SCENE | RECALL | ESC | ||
RECALL | OK? | YES | NO | |
DISPLAY | MODE | : | ALL | |
001.SCENE1 |
|
|
| |
002.SCENE2 |
|
|
| |
003.NO FILE |
|
| ||
004.SCENE4 |
|
|
| |
005.SCENE5 |
|
|
| |
***.5FILE | LOAD |
| ||
|
|
|
|
|
4 To carry out the recall, move the b mark to “YES” and press the MENU knob.
To cancel, press the MENU knob leaving the pointing to “NO.”
When loading is complete, the message “COMPLETE” appears and the ACCESS indicator goes off.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
Notes
•The scene files loaded from the “Memory Stick” overwrite data saved in the camcorder memory.
Data Setting User Loading and Saving 6 Chapter
Saving and Loading Scene Files 105