24P
23.98 frames per second
CCD output | A ( O + E ) | B ( O + E ) |
|
| C ( O + E ) |
| D ( O + E ) |
|
| A ( O + E ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Video output signal | A O | A E | B O | B E | B O | C E | C O | D E | D O | D E | A O | A E |
|
|
|
|
|
|
|
|
|
|
|
|
29.97 frames per second
O:Odd
E:Even
24P mode timing chart
After reading from the CCDs in 24P mode (23.98 frames per second), a
Setting the CCD scan mode to the progressive scan mode
The scan mode of the camcorder has been set to the interlace scan mode at the factory. The FORMAT page of the OPERATION menu allows you to change the CCD scan mode to the progressive scan mode or 24P mode
1 Follow the procedures given in steps 1 to 3 described
in
2 Turn the MENU knob to move the b mark to “SCAN MODE,” and press the MENU knob.
The b mark on the left of “SCAN MODE” changes to a z mark, and the z mark on the left of the setting changes to a ? mark.
19FORMAT
16:9/4:3 SELECT : 16:9
SCAN | MODE | :? | I |
UC/J | SELECT | : | UC |
19FORMAT
16:9/4:3 SELECT : 16:9
SCAN | MODE | : | PsF |
UC/J | SELECT | : | UC |
4 To end the menu operation, set the MENU ON/OFF switch to OFF.
Note
When the
Settings Detailed and Displays Menu 5 Chapter
(“UC/J SELECT” is displayed only for the
3 Turn the MENU knob to display “PsF” or “24P,” and press the MENU knob.
The z mark changes to a b mark, and the ? mark changes to a z mark.
Adjustments and Settings from Menus | 93 |
|
|