This indicates that the menu screen can be scrolled downwards.
This indicates that the menu screen can be scrolled upwards.
b mark
01.OUTPUT 02.TEST OUT 03.FUNCTION1 04.VF DISP 1 05.VF DISP 2 06.`!'LED 07.MARKER 08.GAIN SW 09.VF SETTING 10.AUTO IRIS
To decrease a setting value
Turn the MENU knob clockwise as seen from the front of the camera.
As turning the MENU knob, the setting increases or decreases one step by one step.
If you turn the knob quickly, the numeric value changes rapidly. If you turn it slowly, you can make minute adjustments.
To toggle a setting on or off
2Press the MENU knob.
The selected page is displayed.
Go to step 4.
2 Turn the MENU knob until the desired page appears. 3 Press the MENU knob.
A b mark appears on the left of the item currently selected on the page.
5 Chapter
Menu | 4 Turn the move MENU knob to move the b mark to the | |||
Displays | desired item. | |||
| ||||
and | • Turning the MENU knob counterclockwise as seen | |||
from the front of the camera moves the b mark up | ||||
Detailed | continuously. | |||
| ||||
| • Turning the MENU knob clockwise as seen from the | |||
Settings | front of the camera moves the b mark down | |||
continuously. | ||||
| ||||
| 5 Press the MENU knob. | |||
| The b mark on the left of the selected item changes to | |||
| a z mark, and the z mark on the left of the setting | |||
| changes to a ? mark. | |||
|
|
|
| |
|
|
|
|
6 Turn the MENU knob to change the setting.
To increase a setting value
Turn the MENU knob counterclockwise as seen from the front of the camera.
Turn the MENU knob clockwise or counterclockwise. Each turning operation of the knob toggles the ON and OFF settings.
To cancel the setting/to reset the setting to the initial setting
You can cancel the setting and reset it to its initial value (one set at the factory, or preset value) by pushing the CANCEL/PRST / ESCAPE switch to CANCEL/ PRST before pushing the MENU knob in step 7. When the CANCEL/PRST / ESCAPE switch is set to CANCEL/PRST, the message CANCEL? appears. To cancel the previous setting, push the CANCEL/PRST/ ESCAPE switch to CANCEL/PRST again.
To reset the setting to the initial value, push the CANCEL/PRST/ESCAPE switch to CANCEL/PRST a third time. The message PRESET? appears. To reset to the initial setting, push the CANCEL/PRST/ ESCAPE switch to CANCEL/PRST once more.
The action of the CANCEL/PRST function differs for some setting items. Some items are only affected by PRST. Check the setting procedure for each item for more information.
To interrupt changing the settings
By setting the MENU ON/OFF switch to OFF, the menu disappears from the screen. By setting the MENU ON/OFF switch to ON again, the values that were displayed when you interrupted the setting operations will reappear so you can continue making settings.
7 Press the MENU knob.
The z mark returns to a b mark, and the ? mark returns to a z mark. The setting is confirmed.
8 To continue setting other items in the same page, repeat steps from 4 to 7.
To move to another page
Proceed as follows:
1 Turn the MENU knob to move the b mark to the page number, then press the MENU knob.
If the b mark is placed at a position other than the page
70 | Menu Organization and Operation |
|
|