number, push the CANCEL/PRST / ESCAPE switch to ESCAPE.
A ? mark appears in front of the page number. The camcorder is now in page selecting mode.
2 Turn the MENU knob until the desired page appears.
3 Press the MENU knob when the desired page appears.
To end menu operations
You can end menu operations using the following two methods:
•Turn the MENU ON/OFF switch to OFF.
•Close the cover of the menu operating section. When you
close the cover, the MENU ON/OFF switch is set to OFF automatically.
The menu disappears from the viewfinder screen, and the display indicating the current status of the camcorder appears along the top and bottom of the screen (when the viewfinder DISPLAY switch is set to ON or the VF DISP item on the VF DISP 1 page of the USER menu is set to “ON”).
For details of the viewfinder display, see
The USER MENU CUSTOMIZE menu allows you to configure a USER menu that consists only of pages and items that you need by adding, deleting or replacing the pages.
Adding a new page
The USER MENU CUSTOMIZE menu allows you to add a new page to the USER menu.
While the EDIT page contains
To add a new page, proceed as follows:
1 While holding down the MENU knob, move the MENU ON/OFF switch from the OFF position to the ON position.
The TOP menu appears.
2 Turn the MENU knob to move the b mark to “USER MENU CUSTOMIZE,” then press the MENU knob.
If this is the first time the USER MENU CUSTOMIZE menu has been displayed, the CONTENTS page of the menu appears.
E00 CONTENTS | TOP | |
01.EDIT | PAGE |
|
02.USER | 1 | EDIT |
03.USER | 2 | EDIT |
04.USER | 3 | EDIT |
05.USER | 4 | EDIT |
06.USER | 5 | EDIT |
07.USER | 6 | EDIT |
08.USER | 7 | EDIT |
09.USER | 8 | EDIT |
10.USER | 9 | EDIT |
|
|
|
If the USER MENU CUSTOMIZE menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to one of USER 1 EDIT to USER 19 EDIT and ASSIGN SEL EDIT, then press the MENU knob to display the page.
If a different page is displayed, turn the MENU knob until the desired page appears, then press the MENU knob to select the page.
Example: When you select the USER 2 EDIT page
E02 USER 2 EDIT | TOP |
4 Move the b mark to the item to be added (this operation is unnecessary, if no item exists on the page as shown in the figure for step 3), then press the MENU knob.
The EDIT FUNCTION display appears.
EDIT FUNCTION | ESC |
INSERT
MOVE
DELETE
BLANK
5 Move the b mark to “INSERT,” and press the MENU knob.
The page for the last added item appears.
P25 BLACK/FLARE |
| ESC | ||
MASTER | BLACK | : | 0 | |
R | BLACK |
| : | 0 |
B | BLACK |
| : | 0 |
MASTER | FLARE | : | 0 | |
R | FLARE |
| : | 0 |
G | FLARE |
| : | 0 |
B | FLARE |
| : | 0 |
FLARE |
| : | ON | |
TEST OUT SELECT | : | ENC | ||
|
|
|
|
|
6 Add the items.
Settings Detailed and Displays Menu 5 Chapter
Menu Organization and Operation | 71 |
|
|