Sony DWT-P01 gSET button, f+ or – button, EPeak indicator, eDisplay section, HBattery indication, IMenu display section, DReference level gauge, CAudio input level meter

eDisplay sectionARF (radio frequency) transmission indication

Indicates the current transmission status. : Currently transmitting

—:Transmission stopped

BRF transmission power indication Indicates the current transmission power setting. You can change the setting with the RF POWER function.

H: Transmitting at 50 mW

M: Transmitting at 10 mW

L: Transmitting at 1 mW

CAudio input level meter

Indicates the input signal level of the audio input connector.

DReference level gauge

Indicates the reference input level. When the attenuation is 0 dB with INPUT LEVEL set to MIC, –58 dBu (–60 dBV) is indicated. When LINE is selected for INPUT LEVEL, +4 dBu is indicated.

EPeak indicator

Warns of excessive input by lighting up when the signal is 3 dB below the level at which distortion begins.

FPOWER switch lock indicator Indicates that the POWER switch is locked, preventing the transmitter from being accidentally turned off or on.

For details, see “Locking the POWER switch (POWER SW LOCK)” on page 29.

GWireless remote control condition indication

Indicates the signal transmission condition of the wireless remote control function (4 levels).

: Good transmission

: Somewhat good transmission

: Somewhat poor transmission

: Poor transmission

: Unable to communicate with paired receiver

When the wireless remote control function is off, this indication does not appear.

HBattery indication

Shows the battery condition.

For details, see “Battery indication” on page 18.

IMenu display section

The status of 17 different functions are displayed here. To select the function, press the + or – button repeatedly.

For details, See “Setting Menus” on page 26.

f+ or – button

Selects functions or values shown on the display.

Holding down the – button while switching on the transmitter activates the pairing operation for the wireless remote control function.

gSET button

Adjusts displayed function settings and enters the value.

Holding down the SET button while switching on the power turns the transmitter on without sending a signal.

hUSB connector (Micro USB)

Use this connector to connect an optional USB keyboard to carry out menu functions using key operations. By connecting the digital wireless receiver to this connector with the supplied USB cable, you can

Parts Identification 17