Manuals / Brands / Home Audio / Satellite Radio / Sony / Home Audio / Satellite Radio

Sony DWT-P01 Troubleshooting, Remedy, Symptom, Meanings

1 38

Download 38 pages, 2.28 Mb

Troubleshooting

If you encounter a problem using this transmitter, use the following checklist to find a solution. For any problems with the receiver or adapter, refer to the operating instructions supplied with the respective device. If the problem persists, consult your Sony dealer.

	Symptom	Meanings	Remedy
	The transmitter	The batteries are inserted	Reinsert the batteries with the
	does not turn	backwards in the battery	correct orientation.
	on.	compartment.

		The batteries are exhausted.	Replace the batteries with new
			ones.

	The batteries	Manganese batteries are being	Use alkaline batteries.
	drain quickly.	used.

		The transmitter is being used	The batteries drain quickly under
		under cold conditions.	cold conditions.

	Interruptions in	The transmitter is too far from	Decrease the distance to the
	the reception	the receiver.	receiver and check the reception.
	occurs.
	occurs.	The RF output power setting is	Increase the RF output power.
		The RF output power setting is	Increase the RF output power.
		set to 1 mW (LOW).

	There is no	The channel setting on the	Use the same channel setting on
	sound.	transmitter is different from that	both the transmitter and receiver.
		on the receiver.

		The setting of the encrypted	Confirm that the setting of the
		transmission function on the	encrypted transmission function is
		receiver is different from that on	the same on both the transmitter
		the transmitter.	and the receiver.

	The sound is	The audio input level of the	If a microphone is connected to
	weak.	transmitter is set to LINE or the	the transmitter, set the audio input
		attenuation level is too high.	to MIC. While monitoring the audio
			input level meter, set the
			attenuator to an appropriate level.

	There is	The attenuator is set too low for	While monitoring the audio input
	distortion in the	the audio input level of the	level meter, set the attenuator to a
	sound.	transmitter.	level that does not produce
			distortion.

	The bass is	The frequency of the low-cut	While monitoring the sound,
	weak.	filter is set too high.	decrease the low-cut filter
			frequency to a level that produces
			the proper sound quality.

32 Troubleshooting

Contents

Page WARNING For the customers in the U.S.A For the customers in Canada For the customers in Europe Voor de klanten in Europa For kunder i Europa Para os clientes da Europa Euroopassa oleville asiakkaille For kundene i Europa Euroopa klientidele For the customers in UK: For kundene i Storbritannia: Voor klanten in het Verenigd Koninkrijk: For kunderne i Storbritannien: För kunderna i Storbritannien: For kundene i Tyskland: Voor klanten in Duitsland: For kunderne i Tyskland: För kunderna i Tyskland: Saksassa asuville asiakkaille: För kunderna i Norge: Norjassa asuville asiakkaille: For the customers in Luxembourg: For kundene i Luxemburg: For kundene i Belgia: Voor klanten in België: For kunderne i Belgien: För kunderna i Belgien: Belgiassa asuville asiakkaille: For the customers in Denmark: For kundene i Danmark: Voor klanten in Denemarken: For kunderne i Danmark: För kunderna i Danmark: Voor klanten in Italië: For kunderne i Italien: För kunderna i Italien: Italiassa asuville asiakkaille: For the customers in Sweden: Switzerland: For kundene i Sveits: Voor klanten in Zwitserland: For kunderne i Schweiz: För kunderna i Schweiz: Voor klanten in Finland: For kunderne i Finland: För kunderna i Finland: Suomessa asuville asiakkaille: For the customers in Iceland: Table of Contents Features Switchable mic or line input level and adjustable attenuator What are the strengths of a Digital Wireless Microphone System Selectable RF output power: 1 mW, 10 mW, and 50 mW Power sleep mode Parts Identification eDisplay section ARF (radio frequency) transmission indication RF transmission power indication CAudio input level meter DReference level gauge Power Supply Installing the batteries Battery indication Setting the Transmission Channel Selecting the group/ channel Using the Wireless Remote Control Function To set the group/channel using the pairing mode of the To use the wireless remote control function with a previous pairing To cancel the wireless remote control function Notes on the wireless remote control function Encrypted Function Using secure key mode When you select USB: When you select REMOTE: Using password mode Using a USB Keyboard Menu operations with a USB keyboard To enter a text Basic Menu Operations Types of menu: Setting Menus Naming of transmitter To edit with a keyboard Selecting the group/ channel (GP/CH) Selecting the frequency Setting the RF output power Setting the audio input level Low-cutfilter setting (LCF) Displaying the accumulated use time (TIME) To reset the accumulated time indication Power save setting (POWER To change back to normal operation Setting the encrypted transmission function Generating an internal signal Locking the POWER switch Wireless remote control Resetting parameters to their factory settings Displaying the software version Block Diagram Troubleshooting Page Important Notes on Operation Notes on using the transmitter On cleaning Notes on simultaneous multi- channel operation Note on microphone and transmitter combinations Specifications Transmitting section Audio section General