Low-cut filter setting (LCF)

The frequency of the low-cut filter can be set.

OFF: Turns off the low-cut filter.

20 30 40 50 60 70 80 90 100

120 140 160 180 200 220 (Hz):

Low-cut filter is set according to the selected frequency.

Using wireless remote control, this function can be controlled from the receiver and other devices.

For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 20.

Displaying the accumulated use time (TIME)

You can display the accumulated battery use time as a rough estimate of total transmitter usage.

The factory setting is “00:00”.

To reset the accumulated time indication

1 Hold down the SET button until the time indication flashes.

2 Press the – button so “00:00 RESET” appears, and then press the SET button.

Power save setting (POWER

SAVE)

To conserve power, this setting allows you to put all transmitter functions to sleep.

ACTIVE: The transmitter operates normally.

SLEEP: The sleep function is on. During sleep, the POWER indicator flashes at 2- second intervals.

To change back to normal operation

During sleep, press the SET, +, or – button.

You can also use the wireless remote control to change the receiver back to normal operation.

For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 20.

+48 V power supply setting

(+48V)

You can turn the +48 V power supply on or off for microphones that require an external power supply.

OFF: Power is not supplied to the connected microphone.

ON: Power is supplied to the connected microphone.

Using wireless remote control, this function can be controlled from the receiver and other devices.

For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 20.

Note

The +48 V power supply can be turned on or off, regardless of INPUT LEVEL setting. Note, however, that the +48 V power is actually supplied only when INPUT LEVEL is set to MIC.

28 Setting Menus