Setting Menus
The functions and parameters of the settings menu are explained here. Underlined items are the factory setting.
Naming of transmitter
(NAME)You can specify a transmitter name of up to 16 characters. The factory setting for the transmitter name is the model name and serial number. The transmitter name is sent to the receiver as metadata and is used by the receiver to distinguish between different transmitters.
+: The first press on the + button displays the character set. You can then use the + and
–buttons to select the desired character. And then, pressing the SET button adds the selected character to the end of the current name.
–: Deletes the last character in the current name.
SET: Enters the character or edited name.
Note
You cannot insert or delete a character in the middle of the name.
To edit with a keyboard
You can enter data from an optional keyboard connected to the USB connector.
For details, see “Using a USB Keyboard” on page 24.
26 Setting Menus
Selecting the group/ channel (GP/CH)
The factory settings are as follows:
US modelsU3040: 00 3001 566.125MHz
U4250: 00 4201 638.125MHz
European modelCE6267: 00 6201 798.125MHz
For details, see “Selecting the group/channel” on page 19.
Selecting the frequency
band (BAND)Match the frequency range on this transmitter to that of the Sony digital wireless receiver.
The frequency range that can be set for the optional receiver combined with this transmitter differs as follows:
US models 3040UNot available for TV65 and TV66
For details on the frequency range of each band, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied
Using wireless remote control, this function can be controlled from the receiver and other devices.
For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 20.