Using the Wireless Remote Control Function
1

Turn off the power, and then while

 

Using the

holding down the SET button, turn the

power on.

Wireless Remote

The signal transmission stops.

2 Press the + or – button repeatedly until

Control Function

the GP/CH indication is displayed.

 

3 Hold down the SET button until the

This transmitter is equipped with a wireless

group indication flashes.

remote control function that can be used to

4 Press the + or – button repeatedly to

set the parameters (low-cut filter,

attenuation operation, power save mode,

select a group.

etc.) of the transmitter through the receiver

5 Press the SET button to enter the

or other devices. This function makes it

group.

easier to operate and manage the

The channel indication starts flashing.

microphone system while in the field.

This wireless control is 2.4 GHz

6 Press the + or – button repeatedly to

IEEE802.15.4 compliant and has no effect

on the RF band of digital wireless audio.

select a channel.

This function is activated when pairing is

7 Press the SET button to enter the

established between the transmitter and the

receiver using the RF REMOTE function.

channel.

Pairing must be done first before the

 

To set the group/channel

wireless remote control function can be

used.

using the pairing mode of the

 

wireless remote control

 

Pairing with a receiver

function

 

When the transmitter is paired with the

Pairing links the transmitter with the

receiver which the wireless remote control

receiver, the transmission channel of the

function is to be used.

transmitter is set to the receiving channel on

When the transmitter has been paired with a

the receiver automatically.

receiver through the receiver operation,

 

For details, see“Pairing with a receiver” on

turning on the transmitter while holding

page 20.

down the – button establishes the pairing

 

 

immediately.

 

To carry out pairing through menu

 

operations on the transmitter, do the

 

following.

 

1 Set the receiver to be used for

 

controlling the transmitter to pairing

 

mode.

20