Setting the encrypted transmission function
(ENCRYPTION)You can set the encrypted transmission function.
SECURE KEY: Sets the secure key method.
PASSWORD: Sets the password method.
OFF: The encrypted transmission function is not used.
For details, see “Using the Encrypted Transmission Function” on page 22.
Generating an internal
signal (INTERNAL SG)This transmitter generates a
1kHz: A
OFF: An internal signal is not generated.
Note
If the transmitter is turned off while INTERNAL SG is set to 1 kHz, the setting will revert to OFF automatically.
Locking the POWER switch
(POWER SW LOCK)The POWER switch can be locked to prevent the transmitter from being accidentally turned off or on.
Even when the POWER switch is locked, all parts of the transmitter other than the POWER switch remain functional.
UNLOCK: The POWER switch is not locked.
LOCK: The POWER switch is locked. When LOCK is selected, the POWER switch lock indicator appears in the display.
Wireless remote control
function (RF REMOTE)This function must be set to allow the wireless remote control function to be used between the transmitter and receiver.
OFF: Stops the wireless remote control function.
ON: Starts the wireless remote control function with the previously paired receiver.
PAIRING: Executes a new pairing.
For details, see “Pairing with a receiver” on page 20.
Setting the brightness of
the display (BRIGHTNESS)
Ten levels of brightness can be selected for the organic
Automatic dimming of the
display (DIMMER MODE)The organic
AUTO OFF: The display turns off after 30 seconds. The display goes on again when you press the SET, +, or – button.
AUTO DIMMER: The display dims after 30 seconds. The display becomes bright again when you press the SET, +, or – button.
Setting Menus 29