Sony GDM-F500R Adjusting the centering of the picture (CENTER), Enlarging or reducing the picture (ZOOM), Adjusting the shape of the picture (GEOM), TOP, BOT, Select

Adjusting the centering of the picture (CENTER)

This setting is stored in memory for the current input signal.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight CENTER and press the joystick again.

The SIZE/CENTER menu appears on the screen.

3First move the joystick up or down to select for horizontal adjustment, or for vertical adjustment. Then move the joystick left or right to adjust the centering.

Enlarging or reducing the picture (ZOOM)

This setting is stored in memory for the current input signal.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight SIZE or CENTER and press the joystick again.

The SIZE/CENTER menu appears on the screen.

3Move the joystick up or down to select (zoom), and move the joystick left or right to enlarge or reduce the picture.

Note

Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.

Adjusting the shape of the picture (GEOM)

The GEOM settings allow you to adjust the rotation and shape of the picture.

The (rotation) setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight GEOM and press the joystick again.

The GEOMETRY menu appears on the screen.

3First move the joystick up or down to select the desired adjustment item. Then move the joystick left or right to make the adjustment.

Select To

rotate the picture

expand or contract the picture sides

shift the picture sides to the left or right

adjust the picture width at the top of the screen

shift the picture to the left or right at the top of the screen

Adjusting the convergence (CONV)

The CONV settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals.

If you see red or blue shadows around letters or lines, adjust the convergence.

These settings are stored in memory for all input signals.

1Press the joystick.

The main MENU appears on the screen.

2Move the joystick to highlight CONV and press the joystick again.

The CONVERGENCE menu appears on the screen.

3First move the joystick up or down to select the desired adjustment item. Then move the joystick left or right to make the adjustment.

Select		To
		horizontally shift red or blue shadows
		vertically shift red or blue shadows
	TOP	vertically shift red or blue shadows at
		the top of the screen
V CONVER TOP
	BOT	vertically shift red or blue shadows at
		the bottom of the screen
V CONVER
BOTTOM

12