Selecting the input signal

You can connect two computers to this monitor using the HD15 and BNC connectors. To switch between the two computers, use the INPUT button.

Press the INPUT button.

Each time you press this button, the input signal and corresponding indicator alternate.

When the button is pressed, BNC is selected, when the button is unpressed, HD15 is selected.

HD15

INPUT BNC

The selected connector appears on the screen for a few seconds. “HD15” or “BNC” appears on the screen.

Note

If no signal is input to the selected connector, NO INPUT SIGNAL appears on the screen. After a few seconds, the monitor enters the power saving mode. If this happens, switch to the other connector.

Automatically sizing and centering the picture (AUTO)

You can easily adjust the picture to fill the screen by pressing the ASC (auto sizing and centering) button, or by using the on-screen menu.

xUsing ASC button

Press the ASC button.

The picture automatically fills the screen.

ASC

xUsing the on-screen menu

1Press the joystick to display the main MENU on the screen.

MENU

OK MENU

SCREENCENTER CONV

b

GEOM EXIT COLOR

LANG SIZE OPTION

2Move the joystick to highlight CENTER or SIZE and press the joystick again.

S I ZE / CENTER

b

b

 

2 6

3Move the joystick up or down to select (AUTO).

 

S I ZE / CENTER

GB

b

AUTO

 

 

 

 

ON

 

4Move the joystick to the right ,.

The picture automatically fills the screen.

Notes

•This function is intended for use with a computer running Windows or similar graphic user interface software that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges (such as an MS- DOS prompt).

•Pictures with an aspect ratio of 5:4 (resolution: 1280 × 1024, 1800 × 1440) are displayed at their actual resolution and do not fill the screen to the edges.

•The displayed image moves for a few seconds while this function is performed. This is not a malfunction.

9