Before using your monitor, check that the following accessories are included in your carton:
•Power cord (1)
•HD15 video signal cable (1)
•USB cable (1)
•G3 adapter (for Macintosh blue and white system) (1)
•Setup Disk (1)
•Warranty card (1)
•Notes on cleaning the screen’s surface (1)
•This instruction manual (1)
Step 1: Connect your monitor to your computer
Turn off the monitor and computer before connecting.
Notes•Do not touch the pins of the video signal cable connector as this might bend the pins.
•When connecting the video signal cable, check the alignment of the HD15 connector. Do not force the connector in the wrong way or the pins might bend.
xConnecting to an IBM PC/AT or compatible computer
AC IN
R | G | B | H D | V D |
1 |
| 2 |
|
|
(HD15) |
| (BNC) |
|
|
xConnecting to a Macintosh computer
Use the supplied G3 adapter (for blue and white system).
AC IN
R | G | B | H D | V D |
1 |
| 2 |
|
|
(HD15) |
| (BNC) |
|
|
to HD15
G3 adapter (for blue and white system) (supplied)*
HD15 video signal
to video cable (supplied) output
Power Macintosh G3
*Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with the Power Macintosh G3 computer that has three rows of pins. If you are connecting to the other version of Power Macintosh G3 series computer with two rows of pins or other models, you will need a different adapter (sold separately).
xConnecting to the five BNC connectors
AC IN
R | G | B | H D | V D |
1 |
| 2 |
|
|
(HD15) |
| (BNC) |
|
|
| to HD15 |
to video output |
|
| HD15 video signal |
IBM PC/AT or compatible | cable (supplied) |
computer |
|
to VIDEO IN R/G/B
Refer to the preceding examples to connect to your
to SYNC IN HD/VD
computer.video signal cable
*Connect the cables from left to right in the following order:
Plug & Play (DDC) does not apply to the five BNC connectors. If you want to use Plug & Play, connect your computer to the HD15 connector using the supplied video signal cable.
6