Connecting Universal Serial Bus (USB) compliant peripherals
Your monitor has one upstream and four downstream USB connectors. They provide a fast and easy way to connect USB compliant peripheral devices (such as keyboards, mice, printers and scanners) to your computer using a standardized USB cable. To use your monitor as a hub for your peripheral devices, connect the USBs as illustrated below.
Selecting the on-screen menu language (LANG)
English, French, German, Spanish, Italian, and Japanese versions of the
1Press the joystick
See page 11 for more information on using the joystick.
MENUMENU
COLOR CENTER SCREEN
GEOM EXIT ZOOM
LANG SIZE 
OPTION
Selecting the input signal
You can connect two computers to this monitor using the HD15 and BNC connectors. To switch between the two computers, use the INPUT button.
Press the INPUT button.
The input signal and corresponding input indicator change each time you press this button.
INPUT HD15 BNC
Notes
• If no signal is input to the selected connector, the monitor automatically |
Automatically sizing and centering the picture
You can easily adjust the picture to fill the screen by pressing the ASC (auto sizing and centering) button.
Press the ASC button.
The picture automatically fills the screen.
ASC
Notes
to a USB compliant computer
to USB compliant | to USB compliant |
peripheral devices | peripheral devices |
2Move the joystick to highlight 
LANG and press the joystick again.
LANGUAGE
ENGLISH
FRANÇAIS
switches to the other connector. |
• If you restart the computer you want to view, or that computer is in |
power saving mode, the monitor may automatically switch to the other |
connector’s signal. If this happens, manually select the desired signal |
using the INPUT button. |
• This function is intended for use with a computer running Windows or similar graphic user interface software that provides a
• Pictures with an aspect ratio of 5:4 (resolution: 1280 × 1024, 1800 × 1440*) are displayed at their actual resolution and do not fill the screen to the edges.
• The screen may go blank for a few seconds when the ASC button is
1Turn on the monitor and computer.
2Connect your computer to the square upstream 
connector using the supplied USB cable.
For customers using Windows
If a message appears on your screen, follow the
3Connect your USB compliant peripheral devices to
the rectangular downstream 
USB connectors.
Notes
•Not all computers and /or operating systems support USB configurations. Check your computer’s instruction manual to see if you can connect USB devices.
•In most cases, USB driver software needs to be installed on the host computer. Refer to the peripheral device’s instruction manual for further details.
•The monitor functions as a USB hub as long as the monitor is either “on” or in power saving mode.
•If you connect a keyboard or mouse to the USB connectors and then boot your computer for the first time, the peripheral devices may not function. First connect the keyboard and mouse directly to the computer and set up the USB compliant devices. Then connect them to this monitor.
•Do not lean on the monitor when plugging in the USB cables. The monitor may suddenly shift and cause injury.
DEUTSCH
ESPAÑOL
I TA LIANO
3Move the joystick up or down to select a language and press the joystick again.
•ENGLISH
•FRANÇAIS: French
•DEUTSCH: German
•ESPAÑOL: Spanish
•ITALIANO: Italian
•
: Japanese
To close the menu
Press the joystick once to return to the main menu, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.
To reset to English
Press the RESET button while the LANGUAGE menu is displayed on the screen.
pressed. This is not a malfunction.
*
EN
8 | 9 |
