About the indications in the display
1 | 2 3 | 4 | 5 | 6 | 7 |
SW 
L F E 
SP
L C R
SL S SR
qs
;DIGITAL
;PRO LOGIC II
DTS
SLEEP
OPT
COAX
qa 0 9
MEMORY
D.RANGE STEREO MONO
8
ASW: Lights up when the audio signal is output from the SUB WOOFER jack.
BLFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced.
CSP: Lights up when you turn on the receiver. Turns off when you connect headphones to the PHONES jack.
D; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format.
E; PRO LOGIC II: “; PRO LOGIC” lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “; PRO LOGIC II” lights up when the Pro Logic II Movie/Music decoder is activated.
Note
Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals.
FDTS: Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 26).
GTuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages
HD.RANGE: Lights up when dynamic range compression is activated (page 27).
ICOAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal.
JOPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal.
KSLEEP: Lights up when sleep timer is activated.
LPlayback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound.
L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing))
Example:
Recording format (Front /Surround): 3/2
Sound Field: A.F.D. AUTO
L C R
SL SR
