Adjusting the tone
You can adjust the tonal quality (bass, treble level) of the front speaker using the TONE menu.
1 Start playing a source encoded with multi channel surround effects (DVD, etc.).
2 Press MAIN MENU repeatedly to select “
TONE 
”.
3 Press 
or 
repeatedly to select the parameter you want to adjust.
For details, see “TONE menu parameters” below.
4 While monitoring the sound, press + or
–repeatedly to select the setting you want.
The setting is entered automatically.
5 Repeat steps 3 and 4 to adjust the other items.
Note
You cannot adjust the tone when the receiver is decoding signals with a sampling frequency of more than 48 kHz.
TONE menu parameters
xBASS XX dB
(Front speaker bass level)
xTREB. XX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from
Advanced settings
Using the CUSTOMIZE menu to adjust the receiver
You can adjust various receiver settings using the CUSTOMIZE menu.
1 Press MAIN MENU repeatedly to select “
CUSTOM 
”.
2 Press 
or 
repeatedly to select the parameter you want to adjust.
For details, see “CUSTOMIZE menu parameters” below.
3 Press + or – repeatedly to select the setting you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 to adjust the other items.
CUSTOMIZE menu parameters
The initial setting is underlined.
xDEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for VIDEO 2 and “DEC. PCM” for DVD.
•AUTO
Automatically switches the input mode between DTS, Dolby Digital, or PCM.
•PCM
PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode
Note
When set to “DEC. AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “DEC. PCM”.
