xCTR XXX dB
(Center speaker level)
xSUR.L. XXX dB
(Surround speaker (left) level)
xSUR.R. XXX dB
(Surround speaker (right) level)
xS.W. XXX dB (Sub woofer level)
Initial setting: 0 dB
You can adjust from
x
D.RANGE
COMP. XXX (Dynamic range compressor)
Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night.
•OFF
The dynamic range is not compressed.
•STD
The dynamic range is compressed as intended by the recording engineer.
•MAX
The dynamic range is compressed dramatically.
Tip
Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. We recommend using the “MAX” setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression.
Note
Dynamic range compression is possible with Dolby Digital sources only.
xEFCT. XXX (Effect level)
Initial setting: STD
Lets you adjust the “presence” of the surround effect.
Resetting sound fields to the initial settings
Use the buttons on the receiver for the operation.
1 Press ?/1 to turn off the power.
2 While holding down 2CH, press
?/1.
“SF. CLR.” appears in the display and all sound fields are reset to the initial setting.
