Changing the display
Changing the information in the display
You can check the sound field etc. by changing the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will change cyclically as follows.
Index name of the input* t Selected input t Sound field currently applied
When the tuner is selected
Preset station name* t Frequency t Sound field currently applied
*Index name appears only when you have assigned one to the input or preset station (page 30). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.
Adjusting the brightness of the display
Press DIMMER repeatedly.
The brightness of the display will change in 3 steps.
Amplifier Operation
