Other Operations
Naming preset stations and inputs
You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display.
1 To index a preset station
Press TUNER FM/AM repeatedly to select the FM or AM band, then tune in the preset station you want to create an index name for (page 20).
To index an input
Press the input button to select the input you want to create an index name for.
2 Press MAIN MENU repeatedly to select “
CUSTOM 
”.
3 Press 
or 
repeatedly to select “NAME IN”.
4 Press ENTER.
The cursor flashes and you can select a character.
5 Use 
or 
and + or – to create an index name.
Press + or – repeatedly to select a character, then press > to move the cursor to the next position.
Tips
•You can select the character type as follows by pressing + or – repeatedly.
Alphabet (upper case) t Numbers t Symbols
•To enter a blank space, press + or – repeatedly until a blank space appears in the display.
•If you made a mistake, press < or > repeatedly until the character you want to change flashes, then press + or – repeatedly to select the correct character.
6 Press ENTER to store the index name.
Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time. Use the remote for the operation.
1 Press ALT to light up the button.
2 Press SLEEP while the power is on.
Each time you press SLEEP, the display changes cyclically as follows:
While using Sleep Timer, “SLEEP” lights up in the display.
Tip
To check the remaining time before the receiver turns off, press ALT to light up the button (page 33), then press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled.
