Onkyo DR-815 Connection with External Devices, Timer Function, Colors of the TV Picture Bleed

Troubleshooting—Continued

Connection with External Devices

The interoperability with other external Onkyo device is not available.

•Make sure that the cable and analog audio cables (RCA) are connected correctly. (See page 21.) Con-

necting only an cable won’t work.

•Specify the source name in the display for the external Onkyo device. (See page 28.)

The turntable sounds still.

•Make sure if the turntable has built in phono equalizer.

•If the turntable has no phono equalizer built in, you must provide one separately.

The turntable makes no sound.

•If your turntable uses an MC cartridge, you must con- nect an MC transformer or an MC head amp.

Clock

The clock is wrong.

•CT (Clock Time) information may be taken from a radio station in another time zone. Set ACCUCLOCK to use a specific station. (See page 58.)

Timer Function

Timer playback or recording does not work.

•The clock should be set correctly.

If the clock is not set, playback or recording does not work. Make sure you program the current time.

(See page 58.)

•Timer operation is not activated if the power to the unit is turned on before the timer On time. Be sure to place the unit in Standby mode before timer operation starts. (See page 65.)

•Programmed time may overlap with another timer. Be sure to set multiple timers such that time ranges do not overlap.

•If you try to set the Sleep timer or press TIMER during timer operation, the current timer setting is cancelled.

•The timer operation uses the volume level that was set before the unit was placed in Standby mode. Set an appropriate volume level before you place the unit in Standby mode. (See page 65.)

•Make sure that the cable and RCA/phono audio cables are connected correctly.

•If you selected an external Onkyo component for the timer operation, you must specify the source name.

Time display is not visible during Standby mode.

•Turn the current time display on while the unit is in Standby mode. (See page 60.)

The Colors of the TV Picture Bleed

•Locate the speakers far from the TV.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by unit’s malfunction.

Before you record important data, make sure that the material will be recorded correctly.

This product uses a microcomputer to perform various advanced functions. However, noise, radio interfer- ence, or static electricity could occasionally cause the unit to malfunction. In this case, unplug the power cable from the AC outlet, then plug it in again in five seconds.

81