Onkyo DR-815 Enjoying Surround Sound, Configuring Subwoofer and Setting Up the Number of Speakers

Enjoying Surround Sound

Configuring Subwoofer and Setting Up the Number of Speakers

The DVD receiver will provide you a full-fledged home theater, when it is added on extra speakers in addition to the two front speakers. (For information about how to add on, see page 23.)

The factory default settings support the two channels with only a left and a right front speakers; you must con- figure the settings according to the number of the speak- ers you have added on.

RCV SETUP

/	/
	ENTER
RETURN

1 Press RCV SETUP.

The display will show “1.Sp Config”.

2 Press ENTER.

The display will show “Subwfr :No”.

3	Press / to switch “Yes” and
	“No”.

Yes : Deep bass will be output from a subwoofer.

No : Deep bass will not be output from a subwoofer.

Configure the output setting for a subwoofer to “No” when the output from it is unneeded, even if it is connected.

4 Press / to select “Speaker:”.

5	Press / (repeatedly) to select
	the number of the connected
	speakers.

2ch: Only a left and a right front speakers.

5ch: A center speaker and a left and a right surround speakers in addition to a left and a right front speakers.

6	Press RETURN.
	Returns to the display shown in step 1.
	Go to “Setting Distance of Speakers” at
	page 53.

Notes:

•After you have changed the number of the connected speakers, you must configure the number, because the surround effect is subject to change according to the number of the combined speakers.

•If you want to abort the setting, press “RCV SETUP”.

52