Onkyo DR-815 Creating a Program List for CD, Other functions available from the program menu

Playing Discs—Continued

Creating a Program List

This feature lets you program the play order of titles/ chapters/tracks on a disc.

Important:

•You can’t use Program play with VR format DVD-RW discs, Video CD playing in PBC mode, WMA/MP3 discs, or while a DVD disc menu is being displayed.

•When CD is loaded, no operation information is avail- able on your TV; you can operate the control by view- ing the display on the DVD receiver.

MODE

MEMORY

RANDOM

3

4

Repeat step 2 to build up a pro- gram list.

A program list can contain up to 24 titles/ chapters/tracks.

•You can insert steps into the middle of a program list by just highlighting the position where you want the new step to appear and entering a title/chapter/ track number.

•To delete a step, highlight it and press

CLEAR.

To play the program list, press (play).

Program play remains active until you turn off program play (see below), erase the program list (see below), eject the disc or switch off the player.

Tip:

1

Press MODE and select “Program” from the list of functions on the left.

Use the following controls during program play:

Button	What it does
	Save the program list and exit the pro-
MODE	gram edit screen without starting play-
	back (DVD SETUP does the same).
	Skip to the next step in the program list.

2

Select “Create/Edit” from the list of program options and press ENTER.

You can take a shortcut to display the screen by using MEMORY in stead of using both MODE and / (cursor).

Use the cursor buttons and ENTER to select a title, chapter or track for the current step in the program list.

For a DVD-Video disc, you can add a title or a chapter to the program list.

•For a DVD-Audio disc, you can add a whole group, or a track within a group to the program list.

•For a CD, SACD or Video CD, select a track to add to the program list.

After pressing ENTER to select the title/ chapter/track, the step number automati- cally moves down one.

Creating a Program List for CD

1Press MEMORY while the DVD receiver is stopped.

2Select a track using the number buttons or

/ (cursor).

3Press ENTER to the lower left of the remote controller.

4Repeat steps 1 through 3.

If you press CLEAR here, the last memory will be can- celled.

5 Press the (play) to start playback.

Pressing will stop the DVD receiver and change the mode to NORMAL; if you press CLEAR here, you will see the “Mem.Clear” message, and all the settings stored in memory will get erased.

Other functions available from the program menu

There are a number of other options in the program menu in addition to Create/Edit.

•Playback Start – Starts playback of a saved program list

•Playback Stop – Turns off program play, but does not erase the program list

•Program Delete – Erases the program list and turns off program play

38