Onkyo DR-815 instruction manual Looping a Section of a Disc Using Repeat Play

Playing Discs—Continued

Looping a Section of a Disc Using Repeat Play

The A-B Repeat function allows you to specify two points (A and B) within a track (CD, Video CD) or title (DVD-Video and DVD-RW) that form a loop which is played over and over.

•You can’t use A-B Repeat with DVD-Audio, SACD, and Video CD in PBC mode, or WMA /MP3 files.

•You should configure this setting by viewing the On- Screen display. Therefore even for audio CD, any viewing device must be connected in order to set the two points (A and B) for looping.

MODE

REPEAT

Cursor

///

1	During playback, press MODE and
	select “A-B Repeat” from the list of
	functions on the left.

There are various repeat play options, depending on the kind of disc loaded. It’s also possible to use repeat play together with program play to repeat the tracks/chapters in the program list (see “Creating a Program List” on page 38).

Important:

• You can’t use Repeat play with Video CD in PBC mode, or with WMA/MP3 discs.

• You can’t use repeat and random play at the same time.

1	During playback, press MODE and
	select “Repeat” from the list of
	functions on the left.

2	Select a repeat play option.
	If program play is active, select Program
	Repeat to repeat the program list, or
	Repeat Off to cancel.
	The repeat options available depend on
	the kind of disc loaded. For example, for
	DVD-Video and DVD-RW discs, you
	can select Title Repeat or Chapter Repeat
	(or Repeat Off).

2

3

4

5

40

Select an A-B Repeat play option.

Press ENTER on “A(Start Point)” to set the loop start point.

Press ENTER on “B(End Point)” to set the loop end point.

After pressing ENTER, playback jumps back to the start point and plays the loop.

To resume normal playback, select “Off” from the menu.

•For DVD-Audio discs, select Group Repeat or Track Repeat (or Repeat Off).

•For SACDs, CDs and Video CD, select Disc Repeat or Track Repeat (or Repeat Off).

•If you press , the NORMAL indica- tor lights up on the DVD receiver’s display, indicating the Repeat mode has been disengaged and the mode is set to Normal.

You can select directly the Repeat mode by pressing REPEAT. Every time you press the button, you can change the currently available Repeat modes cyclically. When A-B Repeat is set, it can be also selected as one of the Repeat modes.