Onkyo DR-815 Recording, Source component, Prepare the recording component, Start recording

Recording

The copyright laws prohibit using your recordings without consent of the copyright owner, except for the purpose of your personal entertainment.

1

1

1	Press INPUT on the DVD receiver or the remote controller to select the recording
	source component.
	DVD receiver

Remote

controller

2

3

Prepare the recording component.

•Place the recording component in record standby mode.

•Adjust the recording level on the recording component.

Start recording.

•Start playing the source component selected in Step 1.

Notes:

•Do not change the input selection during recording. Otherwise, the recording cannot be made correctly.

•Set the input source (page 28) to perform Synchro recording, or other system recording using

Onkyo components that feature the connector.

•Select STEREO for the listening mode, when you record in analog form the signals from the built-in DVD.

•The recording level differs depending on the individual sources; you should adjust the level on the recording device.

78