Onkyo DR-815 instruction manual Customizing the Source Names, About short source names

Customizing the Source Names

You can change the source name that appears in the display to suit any component you connected per the instruc-

tions on pages 21-22.

1

Display

2 3-5

1	Press INPUT / until the source
	whose name you wish to change
	appears in the display.
	You can select TAPE or LINE.
2	Press EDIT/NO/CLEAR repeatedly
	until “Name Select?” appears in
	the display.

3 Press MULTI JOG.

4	Turn MULTI JOG to select a new
	name for the source.
	Depending on the source you’ve selected
	in step 1, the name changes in the follow-
	ing order:
	TAPE		HDD	CD-R
		*1
			PC

*1 Select this if you connected an Onkyo USB component that sup-

ports connection.

5	Press MULTI JOG to enter the new
	name.

“Complete” appears in the display. You may press YES/MODE instead of MULTI JOG to get the same result.

About short source names

The short source names appear in the display depending on the situation. Check the short names in the table below.

Ordinary names	Short names
CD-R	CR
GAME	GM
HDD	HD
LINE	LI
PC	PC
TAPE	TA
TV	TV

Note:

Pages 76 and 77 offer a list of the remote controller but- tons you can use after you have changed the source names.

LINE TV

GAME

28