Onkyo DR-815 instruction manual Using the Initial Settings menu, Video Output settings

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and video out- put settings, parental lock settings, and display settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1

2

Press DVD SETUP and select “Ini- tial Settings”.

Use the cursor buttons and ENTER to select the setting and option you want to set.

All the settings and options are explained on the following pages.

/ / /

ENTER

	Notes:
	• In the following table, the default setting is shown in
	bold: other settings are shown in italics.
	• Check the operating instructions supplied with your
DVD SETUP	other equipment to see which digital audio formats it’s
	compatible with.

•Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.

Video Output settings

Setting	Option	What it means
	4:3 (Letter Box)	Set if you have a conventional 4:3 TV. Widescreen movies are
		shown with black bars top and bottom.
TV Screen
(See also “Screen sizes		Set if you have a conventional 4:3 TV. Widescreen movies are
and disc formats” on	4:3 (Pan & Scan)	shown with the sides cropped so that the image fills the
page 73.)		screen.
	16:9 (Wide)	Set if you have a widescreen TV.
	Video	Ordinary (composite) video output.
		Compatible with all TVs.
AV Connector Out
	S-Video	Almost the same quality as RGB, but can give better results if
		you’re using a long SCART cable.
	RGB	If your TV is compatible, this gives the best picture quality.

68