If you are unable to remedy the problem using the troubleshooting guide
Clearing the receiver’s memory may remedy the problem (page 14). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing the receiver’s memory
To clear | See |
All memorized settings | page 14 |
|
|
Customized sound fields | page 27 |
|
|
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(Models of area code U only)
With 6 ohm loads, both channels driven, from 120 – 20,000 Hz; rated 80 watts
60watts
Amplifier section
Power Output1) |
|
Models of area code U |
|
(6 ohms 1 kHz, THD 10%) | FRONT2): 120 W/ch |
| CENTER2): 120 W |
| SURR2): 120 W/ch |
FRONT2): 100 W/ch | |
| CENTER2): 100 W |
| SURR2): 100 W/ch |
Models of area code CA
(6 ohms 1 kHz, THD 0.7%)
FRONT2): 80 W/ch | |
| CENTER2): 80 W |
| SURR2): 80 W/ch |
(6 ohms 1 kHz, THD 10%) | FRONT2): 100 W/ch |
| CENTER2): 100 W |
| SURR2): 100 W/ch |
1) Measured under the following conditions:
Area code | Power requirements |
U, CA | 120 V AC, 60 Hz |
|
|
2)Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)
CD, MD/TAPE, | Sensitivity: 800 mV |
VIDEO 1, 2, DVD | Impedance: 50 kiloohms |
|
|
Inputs (Digital) |
|
|
|
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
|
|
VIDEO 2 (Optical) | Sensitivity: – |
| Impedance: – |
|
|
