SOFT TRANSMake the transition slowly at the beginning and end, and linearly in between.

*1

*2

bNote

•You cannot change [TRANS TIME] and [TRANS CURVE] settings during store, check, or execution of [SHOT TRANS]. Cancel [SHOT TRANS] setting by pressing the ASSIGN button 1 several times before changing [TRANS TIME] or [TRANS CURVE] setting.

xSTART TIMER

You can set the timer for starting the shot transition. You can select the time from [5sec], [10sec] and [20sec] (the default setting is [OFF]).

xREC LINK

BOFF

Select not to start transition when the recording is started.SHOT-ASelect to start transition to SHOT-A when the recording is started.SHOT-BSelect to start transition to SHOT-B when the recording is started.INTERVAL REC

You can record a series of movies on a tape at regular intervals. This function is useful to observe things like cloud movements or daylight changes. The scenes run smoothly into each other when you play back the tape. Use the AC Adapter/Charger to obtain AC power for long recording.

Recording Recording Recordinginterval interval
1Select [ON/OFF] t [ON] with the SEL/ PUSH EXEC dial.

2Perform the following step if you are changing the recording time from the default setting of [0.5sec]. If you are

keeping the default recording time, go straight to step 3.

Select [REC TIME] t [0.5sec], [1sec], [1.5sec] or [2sec] with the SEL/PUSH EXEC dial.

3Perform the following step if you are changing the interval time from the default

setting of [30sec]. If you are keeping the default interval time, go straight to step 4.

Select [INTERVAL] t [30sec], [1min],

 

[5min] or [10min]

 

 

4 Select [OK] with the SEL/PUSH EXEC

 

dial.

Using

5 Press the MENU button to hide the menu

 

screen.the
6 Press the REC START/STOP button.

Menu

The [INTERVAL REC] recording starts.

 

To cancel [INTERVAL REC], press the

 

REC START/STOP button.

 

The operation of your camcorder differs

 

depending on when you press the REC

 

START/STOP button.

 

If you press the button during [INTERVAL

 

REC] recording, the recording temporarily

 

stops, then if you press it again, the

 

[INTERVAL REC] recording restarts.

 

If you press the button during [INTERVAL

 

REC] interval, the [INTERVAL REC]

 

recording stops and regular recording starts,

 

then if you press it again, regular recording

 

stops. If you press the button once again,

 

the [INTERVAL REC] recording restarts.

 

To cancel the [INTERVAL REC]

 

recording, select [ON/OFF] t [OFF] with

 

the SEL/PUSH EXEC dial.

 

bNotes

•The recording time and interval time may differ slightly from the settings.

•If you focus manually, you can get sharp images even if the lighting changes.

•You can disable the operation sound by setting [BEEP] to [OFF] (p. 91).

Continued , 73