Press the MENU button t select the (AUDIO SET) by turning the SEL/PUSH EXEC dial.

bNotes

•This function is effective only when the AUTO/ MAN switches of both CH1 and CH2 are set to MAN (p. 48).

•When [LINKED] is set, you can adjust the volume with the AUDIO LEVEL dial of CH1 (p. 48).

xINPUT1 LEVELYou can switch between microphone and line for input from the INPUT1 jack.BMIC

Select to input audio signals from an external microphone through the INPUT1 jack.

appears on the status check screen.

LINESelect to input audio signals from an audio device through the INPUT1 jack. appears on the status check screen. x INPUT1 TRIM

You can adjust levels of signal input from the INPUT1 jack. This function is effective only when [INPUT1 LEVEL] is set to [MIC].

You can select from [0dB], [-8dB] and [- 16dB] (the default setting is [0dB]).xINPUT1 WINDThis function is effective only when [INPUT1 LEVEL] is set to [MIC].

BOFF

Select to disable wind noise reduction.

ON

Select to enable wind noise reduction. appears on the status check screen. x INPUT2 LEVELYou can switch between microphone and line for input from the INPUT2 jack.

BMIC

Select to input audio signals from an external microphone through the INPUT2 jack.

appears on the status check screen.

LINE

Select to input audio signals from an audio device through the INPUT2 jack.

appears on the status check screen.

xINPUT2 TRIM

You can adjust levels of signal input from the INPUT2 jack. This function is effective only when [INPUT2 LEVEL] is set to [MIC].

You can select from [0dB], [-8dB] and [- 16dB] (the default setting is [0dB]).

xINPUT2 WINDThis function is effective only when [INPUT2 LEVEL] is set to [MIC].

BOFF

Select to disable wind noise reduction.

ON

Select to enable wind noise reduction. appears on the status check screen.

zTips

•The INPUT TRIM function adjusts the input level from an external microphone. When using a highly sensitive microphone or recording loud sound, set this to the minus side. When using a less sensitive microphone or recording quiet sound, set it to the plus side.

•When recording loud sound, the sound may be distorted at either the input point or the recording point. If it is distorted at the input point, adjust the sound using the INPUT TRIM function. If it is distorted at the recording point, lower the total volume level manually.

•If you set INPUT TRIM too far to the minus side, the microphone volume becomes too low, resulting in a poor signal to noise ratio.

•Test the effect of the INPUT TRIM function according to the microphone used or the sound field of the recording site before actual recording.

76